The basic equipment consists of mechanical parts and electrical control system. The starting position, enamelled wire specification and winding width are three important winding parameters for using the automatic winding machine. How to operate the tension adjustment method of the automatic winding machine?
There is no fixed position for the starting point of winding on the framework. The position and coil outlet are determined by the coil model. Generally, the specific starting position and value can be measured by using the measurement function of the equipment control system.
The enamelled wires in daily use have different wire diameters, and different specification settings of enamelled wires will produce different wire arrangement effects. When using enamelled wires of different materials, pay attention to correct the specific values of wire diameters, so that the copper wires will not be deformed.
Of course, the small deformation caused by the applied force must be taken into account when setting, which will have a certain impact on the production of the winding width value. Therefore, multiple measurement methods should be used to take the smallest value as the winding width.
How to adjust and control the tension of automatic winding machine when operating it? I think so:
It is well known that the winding device is convenient for winding yarn on an appropriate spool composed of cylindrical or flat tapered cross wound spools.
Then the tension mechanism of the full-automatic winding machine is also more precise, mainly equipped with two types of permanent magnetic damper and electromagnetic tensioner. There is no great difference in the setting methods of the two. Both are flexible combination of the wire passing method according to the size of the wire diameter. The thin wire needs uniform and stable tension control, while the thick wire needs large tension and a certain flexibility, which should be controlled according to the tension demand when used.